Buroval Store

TENDA TEG1105PD GIGABIT PD 5 PORTSWITCH AVEC 4 PORT PoE

Category:

د.ج 6.400,00

5 Gigabit Ports, PSE & PD Functionality
The 5 ports of TEG1105PD are all Gigabit ports, with 4 PoE OUT ports (ports 1 to 4) and 1 PoE IN port (port 5). The switch can be powered by IEEE 802.3af compliant PSE via port 5 through an Ethernet cable, and provide power to low-power APs and IP cameras via ports 1 to 4. TEG1105PD includes both Power Sourcing Equipment (PSE), which is the PoE power supply, and Powered Device (PD), which is any PoE-powered device that consumes power.

Smooth Gigabit Speed ​​up to 200 meters, Stable Transmission
As a switch, the switch can extend the data transmission distance up to 325 meters and provide long-distance PoE power supply through multiple PoE ports. Suitable for medium and long-distance wired monitoring scenarios or low-power wireless coverage scenarios.

Low Cost, Convenient to Use and Stability
TEG1105PD does not require a dedicated and independent power supply, it is completely plug & play; moreover, it allows the use of a reduced number of cables. Therefore, the cost of implementing the network can be significantly reduced while ensuring the quality of the project.

6KV Lightning Protection, Always Stable Operation
This switch implements a protection system against short circuits and overvoltages that may be caused by lightning for all ports, allowing constant operation.

Compact and portable, it can be easily installed in a waterproof box for outdoor use
Thanks to its extremely compact design, TEG1105PD can be installed everywhere. In addition, its metal case makes it extraordinarily robust and durable over time.

Technical Specifications

  • Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
  • LED indicators:

1x Power LED indicator
4x PoE LEDs
5x Link/Act LED indicators

  • Interfaces:

4 10/100/1000 Base-T Ethernet Ports (Data/PoEUT)
1 10/100/1000 Base-T Ethernet Port (Data IN/PoE)

  • Recommended with CAT5/5e UTP cable or higher
  • 10 Gbps switching capacity
  • Packet forwarding rate 7.44 Mpps
  • Buffer 1 MB
  • MAC Address Table 2K
  • Jombo 9K Frame
  • Single Port PoE Budget: AF: 15.4W

Environmental characteristics

  • Operating temperature: 0 ~ 45°C
  • Storage temperature: -40 ~ 70°C
  • Operating Humidity: 10%~90% non-condensing
  • Storage humidity: 5%~90% non-condensing

Dimensions

  • Width: 100.0 mm
  • Depth: 100.0 mm
  • Height: 26.0 mm

Certifications

  • THERE IS
  • FCC
  • RoHS

Package Contents

  • Switch I-SWHUB TEG1105PD
  • User Manual
Technical data sheet
general
Brand TENT Barcode 6932849431827
Chassis Format Desktop Color Gold
Certifications CE, FCC, RoHS Years of Warranty 2
Supplier Code TEG1105PD
connectivity
LAN Port Speed 10/100/1000 Mbps Number of LAN ports 5
Number of RJ-45 ports 5 Number of SFP or GBIC ports
Number of Fiber Optic Ports Console door No
Technical specifications
Switch Management Unmanaged Quality of Service (QoS) No
VLAN support No MAC Table Size 2k (2’048 addresses)
802.3af PoE support Yes Number of POE ports 5
Maximum power single POE port 15.4W
dimensions
Length 100.0 mm Height 26.0 mm
Depth 100.0 mm Weight 0.2820

املأ بياناتك أدناه للطلب

المنتج ...
التوصيل ...

الإجمالي ...

املأ بياناتك أدناه للطلب

المنتج ...
التوصيل ...

الإجمالي ...
5 Gigabit Ports, PSE & PD Functionality
The 5 ports of TEG1105PD are all Gigabit ports, with 4 PoE OUT ports (ports 1 to 4) and 1 PoE IN port (port 5). The switch can be powered by IEEE 802.3af compliant PSE via port 5 through an Ethernet cable, and provide power to low-power APs and IP cameras via ports 1 to 4. TEG1105PD includes both Power Sourcing Equipment (PSE), which is the PoE power supply, and Powered Device (PD), which is any PoE-powered device that consumes power.

Smooth Gigabit Speed ​​up to 200 meters, Stable Transmission
As a switch, the switch can extend the data transmission distance up to 325 meters and provide long-distance PoE power supply through multiple PoE ports. Suitable for medium and long-distance wired monitoring scenarios or low-power wireless coverage scenarios.

Low Cost, Convenient to Use and Stability
TEG1105PD does not require a dedicated and independent power supply, it is completely plug & play; moreover, it allows the use of a reduced number of cables. Therefore, the cost of implementing the network can be significantly reduced while ensuring the quality of the project.

6KV Lightning Protection, Always Stable Operation
This switch implements a protection system against short circuits and overvoltages that may be caused by lightning for all ports, allowing constant operation.

Compact and portable, it can be easily installed in a waterproof box for outdoor use
Thanks to its extremely compact design, TEG1105PD can be installed everywhere. In addition, its metal case makes it extraordinarily robust and durable over time.

Technical Specifications

  • Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
  • LED indicators:

1x Power LED indicator
4x PoE LEDs
5x Link/Act LED indicators

  • Interfaces:

4 10/100/1000 Base-T Ethernet Ports (Data/PoEUT)
1 10/100/1000 Base-T Ethernet Port (Data IN/PoE)

  • Recommended with CAT5/5e UTP cable or higher
  • 10 Gbps switching capacity
  • Packet forwarding rate 7.44 Mpps
  • Buffer 1 MB
  • MAC Address Table 2K
  • Jombo 9K Frame
  • Single Port PoE Budget: AF: 15.4W

Environmental characteristics

  • Operating temperature: 0 ~ 45°C
  • Storage temperature: -40 ~ 70°C
  • Operating Humidity: 10%~90% non-condensing
  • Storage humidity: 5%~90% non-condensing

Dimensions

  • Width: 100.0 mm
  • Depth: 100.0 mm
  • Height: 26.0 mm

Certifications

  • THERE IS
  • FCC
  • RoHS

Package Contents

  • Switch I-SWHUB TEG1105PD
  • User Manual
Technical data sheet
general
Brand TENT Barcode 6932849431827
Chassis Format Desktop Color Gold
Certifications CE, FCC, RoHS Years of Warranty 2
Supplier Code TEG1105PD
connectivity
LAN Port Speed 10/100/1000 Mbps Number of LAN ports 5
Number of RJ-45 ports 5 Number of SFP or GBIC ports
Number of Fiber Optic Ports Console door No
Technical specifications
Switch Management Unmanaged Quality of Service (QoS) No
VLAN support No MAC Table Size 2k (2’048 addresses)
802.3af PoE support Yes Number of POE ports 5
Maximum power single POE port 15.4W
dimensions
Length 100.0 mm Height 26.0 mm
Depth 100.0 mm Weight 0.2820

TENDA TEG1105PD GIGABIT PD 5 PORTSWITCH AVEC 4 PORT PoE

Category:

د.ج 6.400,00

املأ بياناتك أدناه للطلب

المنتج ...
التوصيل ...

الإجمالي ...

TENDA TEG1105PD GIGABIT PD 5 PORTSWITCH AVEC 4 PORT PoE

Category:

د.ج 6.400,00

5 Gigabit Ports, PSE & PD Functionality
The 5 ports of TEG1105PD are all Gigabit ports, with 4 PoE OUT ports (ports 1 to 4) and 1 PoE IN port (port 5). The switch can be powered by IEEE 802.3af compliant PSE via port 5 through an Ethernet cable, and provide power to low-power APs and IP cameras via ports 1 to 4. TEG1105PD includes both Power Sourcing Equipment (PSE), which is the PoE power supply, and Powered Device (PD), which is any PoE-powered device that consumes power.

Smooth Gigabit Speed ​​up to 200 meters, Stable Transmission
As a switch, the switch can extend the data transmission distance up to 325 meters and provide long-distance PoE power supply through multiple PoE ports. Suitable for medium and long-distance wired monitoring scenarios or low-power wireless coverage scenarios.

Low Cost, Convenient to Use and Stability
TEG1105PD does not require a dedicated and independent power supply, it is completely plug & play; moreover, it allows the use of a reduced number of cables. Therefore, the cost of implementing the network can be significantly reduced while ensuring the quality of the project.

6KV Lightning Protection, Always Stable Operation
This switch implements a protection system against short circuits and overvoltages that may be caused by lightning for all ports, allowing constant operation.

Compact and portable, it can be easily installed in a waterproof box for outdoor use
Thanks to its extremely compact design, TEG1105PD can be installed everywhere. In addition, its metal case makes it extraordinarily robust and durable over time.

Technical Specifications

  • Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
  • LED indicators:

1x Power LED indicator
4x PoE LEDs
5x Link/Act LED indicators

  • Interfaces:

4 10/100/1000 Base-T Ethernet Ports (Data/PoEUT)
1 10/100/1000 Base-T Ethernet Port (Data IN/PoE)

  • Recommended with CAT5/5e UTP cable or higher
  • 10 Gbps switching capacity
  • Packet forwarding rate 7.44 Mpps
  • Buffer 1 MB
  • MAC Address Table 2K
  • Jombo 9K Frame
  • Single Port PoE Budget: AF: 15.4W

Environmental characteristics

  • Operating temperature: 0 ~ 45°C
  • Storage temperature: -40 ~ 70°C
  • Operating Humidity: 10%~90% non-condensing
  • Storage humidity: 5%~90% non-condensing

Dimensions

  • Width: 100.0 mm
  • Depth: 100.0 mm
  • Height: 26.0 mm

Certifications

  • THERE IS
  • FCC
  • RoHS

Package Contents

  • Switch I-SWHUB TEG1105PD
  • User Manual
Technical data sheet
general
Brand TENT Barcode 6932849431827
Chassis Format Desktop Color Gold
Certifications CE, FCC, RoHS Years of Warranty 2
Supplier Code TEG1105PD
connectivity
LAN Port Speed 10/100/1000 Mbps Number of LAN ports 5
Number of RJ-45 ports 5 Number of SFP or GBIC ports
Number of Fiber Optic Ports Console door No
Technical specifications
Switch Management Unmanaged Quality of Service (QoS) No
VLAN support No MAC Table Size 2k (2’048 addresses)
802.3af PoE support Yes Number of POE ports 5
Maximum power single POE port 15.4W
dimensions
Length 100.0 mm Height 26.0 mm
Depth 100.0 mm Weight 0.2820

املأ بياناتك أدناه للطلب

المنتج ...
التوصيل ...

الإجمالي ...

آخر المنتوجات

المنتجات المميزة

التخفيضات

0
    0
    السلة
    Secure Checkout
    Fast Shipping
    Easy Returns
    Retour en haut